Renishaw Probe Systems

Wenzel CMM’s are fitted with the Renishaw range of probe head, bodies, styli and tool changers.

A FREE TOOL CHANGER OFFER is currently available from Wenzel America when you purchase a new Wenzel CMM fitted with a Renishaw probing system. Contact us for more information.

PH10 Motorised indexing heads allow flexible and repeatable probe re-orientation.
The range comprises three PH10 models, each of which can carry a range of probes and extensions and can be orientated in 720 repeatable positions, giving access to the most difficult-to-reach workpiece features.

The Renishaw REVO™ high speed scanning probe is available from Wenzel for use in a range of applications including turbine blade and blisk measurement as well as cylinder head and bore measurement, in fact any scanning application can benefit from the Renishaw REVO™ technology.
REVO™ is a dynamic new measuring head and probe system that offers 5-axis measurement capability and is designed to maximise CMM throughput whilst maintaining high system accuracy.

REVO™ uses synchronised motion and Renscan5™ measurement technology to minimise the dynamic effects of CMM motion at ultra high measurement speeds. Using Renscan5™, measurements are taken whilst moving the REVO™ head synchronously with the CMM. The unwanted effects of CMM dynamics at high speeds are removed.

The REVO™ probe is available with probe lengths of 350 mm, even longer in future and is driven by the Renishaw UCC2 controller using the I++ DME protocol interface. The system is coupled with the Wenzel Metrosoft measurement software.

Wenzel America has a REVO™ demonstration system installed in the Gloucester Technical Centre, available now for customer evaluation.

SP25M comprises two sensors in a single housing. Users can switch between a choice of four scanning modules (which can carry M3 styli with lengths from 20 mm to 400 mm) and an adaptor module that is compatible with Renishaw's TP20 range of probe modules. This capability enables scanning and touch-trigger probing in a single probe system.

The SP25M's compact size and autojoint mounting makes it compatible with the PH10M/MQ and PH6M probe heads. It can also be mounted on a multiwired extension bar. Together, these combinations permit excellent reach and access to part features.

TP200 probe uses micro strain gauge transducers to deliver excellent repeatability and accurate 3D form measurement even with long styli.

The sensor technology gives sub-micron repeatability and eliminates the lobing characteristics encountered with kinematic probes.

The TP200B uses the same technology as TP200 but has been designed to have higher tolerance to vibration. This helps to overcome the problem of 'air' trigger generation which can arise from vibrations transmitted through the CMM or when using long styli with faster positioning speeds.

Please note that we do not recommend the use of TP200B with the LF module or cranked/star styli.

TP20 is a compact 5-way, or 6-way, kinematic touch-trigger probe system. The two-piece design, comprising probe body and detachable stylus module(s), connected using a highly repeatable magnetic kinematic coupling.  This provides the facility to change stylus configurations either manually or automatically without the need for requalification of the stylus tips, thereby giving significant time savings in inspection routines.

Modules offering a range of trigger forces allow the probe performance to be best matched to the measurement task. A set of probe extensions is also available, as is a 6-way module.  The stylus mounting thread accepts styli from the Renishaw M2 range.

Tool Changers. Renishaw supply a range of tool changers for their products. These include the MCR20 for the TP20 range, SCR200 for the TP200 and FCR25 for the SP25 probe system.

Fixturing Systems
Wenzel America is also able to offer a full range of modular Fixturing and dedicated fixture systems. Please contact us to discuss your exact requirements.

Turnkey Systems
Wenzel America has supplied many turnkey solutions to our customers including air conditioned rooms, foundations and cranes. If your project needs an element of turnkey assistance then please contact us.