The new coordinate measuring machine SF 1210 is WENZEL’s answer to the trend to bring metrology closer to production. The SF 1210 offers a large measuring volume of 1200 x 1500 x 1000 mm. This makes it ideal for a major part of the cutting and forming industry. The extended temperature range makes it the ideal system solution for manufacturers of e.g. castings, chassis parts, subframes, engines, etc. The machine concept offers a very good price-performance ratio with a small footprint. The double drive in the Y-axis provides for highest accelerations and speeds and thus for high productivity, e.g. also in connection with an automation. The SF1210 is compatible with the complete sensor program from WENZEL. This flxibility ensures effiiency increases in your measuring and testing process.
The exaCT L offers a simplified, cost-effective and completely automated workfl ow for the entire CT analysis process. Due to its high X-ray performance in combination with a fast detector, the exaCT L enables the measurement and inspection of components in a short time. Due to the intuitive user guidance, exact measurement results can allready be generated after a short training period. The exaCT L thinks ahead: Measuring parameters are automatically optimized by the system. In its performance class, the exaCT L is one of the most compact computed tomographs on the market. It has three independent axes and offers an impressive X-ray performance. Hardware and software offer the possibility of automated integration into the production line and are the appropriate answer to questions regarding Industry 4.0 solutions.
The optical 3D sensor WM | RS-C is an surface measuring white light interferometer and was developed for measuring, characterizing and inspecting topographies, roughness and finest structures in a microscopic environment. The WM | RS-C captures 3D surfaces as a point cloud or triangulated STL mesh and thus enables DIN EN ISO-compliant 2D and 3D roughness evaluation. The particular strength of the sensor lies in the measurement of vertically and horizontally high-resolution surfaces. The optical 3D sensor WM | RS-C uses the short coherence length of „white“ light to measure technical surfaces vertically at highest resolution. An internal GigE camera with full HD resolution and an integrated LED with optimized spectral distribution are used. The interferometer is usually operated with exchangeable Mirau lenses. In the table version, the interferometer works with a piezo-driven actuator, which enables high-resolution scanning of topographies.
The optical sensor WM | LS 600 with a line width of 280 mm up to 600 mm allows an extended field of application for large portal cmms as well as for horizontal arm machines from WENZEL. The sensor allows even large components to be measured quickly and reliably. Whether for components of electric mobility, e.g. battery boxes or for the measurement of tipping containers on trucks: the WM | LS 600 is suitable for almost every larger component. Additionally the WM | LS 600 can be combined with the well-known WM | Shapetracer II from WENZEL on a cmm. This combination forms an unbeatable DUO and turns your coordinate measuring machine into an all-purpose weapon with which even the most complex workpieces can be measured quickly and easily.